Mobile |
Mobile module |
5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4×4 MIMO), 900/600 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL |
Status |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities |
USSD |
Supports sending and reading Unstructured Supplementary Service Data messages |
Black/Whiles list |
Operator black/white list |
Multiple PDN |
Possibility to use different PDNs for multiple network access and services |
Band management |
Band lock, Used band status display |
APN |
Auto APN |
Bridge mode |
Direct connection (bridge) between mobile ISP and device on LAN |
Wireless |
Wireless mode |
802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) |
WiFi security |
WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
ESSID |
ESSID stealth mode |
Wireless Hotspot |
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
Ethernet |
WAN |
1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
LAN |
4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover |
Network |
Routing |
Static routes, Dynamic routes (planned) |
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) |
Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
Connection monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall |
Port forwards, traffic rules, custom rules |
DHCP |
Static and dynamic IP allocation |
DHCP |
Static and dynamic IP allocation |
DDNS |
Supported >25 service providers, others can be configured manually |
SSHFS |
Possibility to mount remote file system via SSH protocol |
Security |
Authetication |
Pre-shared key, digital certificates, X.509 certificates |
Firewall |
Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T |
Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
VLAN |
Port and tag-based VLAN separation |
Mobile quota control |
Port and tag-based VLAN separation |
WEB filter |
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN |
OpenVPN |
Multiple clients and a server can run simultaneously, 12 encryption methods |
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPSec |
IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE |
GRE tunnel |
PPTP, L2TP |
Client/Server instances can run simultaneously, L2TPv3 support (planned) |
Stunnel |
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
DMVPN |
Method of building scalable IPsec VPNs |
SSTP |
SSTP client instance support |
ZeroTier |
ZeroTier VPN client support |
WireGuard |
WireGuard VPN client and server support |
MODBUS |
Modbus TCP Slave (PLANNED) |
ID filtering |
Respond to one ID in range [1;255] or any |
Allow remote access |
Allow access through WAN |
Custom registers |
Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality |
Modbus TCP Master (PLANNED) |
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
MQTT Gateway (PLANNED) [/iconheading] |
Gateway |
Allows sending commands and receiving data from Modbus Master trough MQTT broker |
Data to Server (PLANNED) [/iconheading] |
Protocols |
HTTP(S), MQTT, Azure MQTT, Kinesis |
Monitoring & Management |
WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
FOTA |
Firmware update from server, automatic notification |
SSH |
SSH (v1, v2) |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
Call |
Reboot, Status, Mobile data on/off, Output on/off |
MQTT |
MQTT Broker, MQTT publisher |
SNMP |
SNMP (v1, v2, v3), SNMP trap |
JSON-RPC |
Management API over HTTP/HTTPS |
Modbus |
Modbus TCP status/control |
RMS |
Teltonika Remote Management System (RMS) |
IoT Platforms |
Clouds of things |
Allows monitoring of: Device data, Mobile data, Network info, Availability |
ThingWorx |
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
Cumulocity |
Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
Azure IoT Hub |
Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
System Characteristics |
CPU |
Quad-core ARM Cortex A7, 717 MHz |
RAM |
256 MB (100 MB available for userspace) |
FLASH storage |
256 MB (100 MB available for userspace) |
Firmware / Configuration |
WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup |
FOTA |
Update FW/configuration from server |
RMS |
Update FW/configuration for multiple devices at once |
Keep settings |
Update FW without losing current configuration |
Input/Output |
Input |
1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high |
Events |
SMS, Email, RMS |
Power |
Connector |
4-pin industrial DC power socket |
Input voltage range |
9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max |
Power consumption |
Idle: <4 W, Max: <18 W |
Physical Interfaces (Ports, Leds, Antennas, Buttons, SIM) |
Ethernet |
5 x RJ45 ports, 10/100/1000 Mbps |
I/Os |
1 x Digital Input, 1 x Digital Output on 4-pin power connector |
Status LEDs |
3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs |
SIM |
2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V |
Antenna |
4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS |
Power |
1 x 4-pin DC power connector |
Reset |
Reboot/User default reset/Factory reset button |
Physical Specification |
Casing material |
Aluminium housing |
Dimensions (W x H x D) |
132 x 44.2 x 95.1 mm |
Weight |
533 g |
Mounting options |
DIN rail (can be mounted on two sides), flat surface placement |
Operating Environment |
Operating temperature |
-40 °C to 75 °C |
Operating humidity |
10 % to 90 % non-condensing |